Table of Contents
Advertisement
show ip ospf border-routers
show ipv6 ospf border-routers
Copyright © 2010, Juniper Networks, Inc.
Example 3
host1#show ipv6 ospf
Routing Process OSPFv3 1 with Router ID 10.1.1.1
OSPFv3 administrative state is enabled
OSPFv3 operational state is enabled
Incremental External SPF is OFF
Graceful Restart capability is OFF
Graceful Restart helper capability is OFF
Ospf set trap field disabled
SPF schedule delay 0 secs, Hold time between two SPFs 3 secs
Maximum path splits 4
Area BACKBONE(0.0.0.0)
SPF algorithm executed 13 times
ABDR count 1
ASBDR count 1
LSA Count 117
Number of interfaces in this area is 3
Area ranges are:
Number of active areas in this router is 1
1normal, 0 stub, 0 NSSA.
See show ip ospf
See show ipv6 ospf
Use to display a list of OSPF border routers.
Field descriptions
Destination—Destination's router ID
NEXT HOP—Next hop toward the destination
Interface—Interface for which you are obtaining the information
Router Type—Router type of the destination: either an ABR or AS boundary router,
or both
Route Type—Type of this route: either an intra-area or interarea route
Area—Area ID of the area from which this route is learned
Example 1
host1#show ip ospf border-routers
Destination NEXT HOP
5.5.0.250
5.5.6.250
5.5.0 250
4.4.4.250
6.6.6.250
4.4.4.13
Example 2
host1#show ipv6 ospf border-routers
OSPF Area Border Routers
Destination
10.0.0.10
Interface
Router Type
fastethernet0
ABR/ASBR
fastethernet0
ABR/ASBR
fastethernet0
ABR
NEXT_HOP
Interface
FE80::3
ATM4/1.39
Chapter 5: Configuring OSPF
Route Type Area
INTRA
0.0.0.0
INTRA
0.0.0.1
INTRA
0.0.0.1
RouteType
Area
INTRA
0.0.0.0
297
Advertisement
Table of Contents
