Table of Contents
Advertisement
Copyright © 2010, Juniper Networks, Inc.
total—Total number of received packets
errors—Error packets received
destination unreach—Packets received with destination unreachable
admin unreach—Packets sent because the destination was administratively
unreachable (for example, due to a firewall filter)
parameter problem—Packets received with parameter errors
time exceeded—Packets received with time-to-live exceeded
pkt too big—Number of packet-too-big messages sent because a received packet
was too large to forward because of the allowed MTU size
redirects—Received packet redirects
echo requests—Echo request (ping) packets
echo replies—Echo replies received
rtr solicits—Number of sent router solicitations
rtr advertisements—Number of sent router advertisements
neighbor solicits—Number of sent neighbor solicitations
neighbor advertisements—Number of sent neighbor advertisements
Group membership (queries, responses, reductions)—Number of queries, responses,
and reduction requests sent to a group to which the interface is assigned
UDP Statistics Rcvd:
total—Total number of received packets
checksum errors—Checksum error packets received
no port—No port error packets received
UDP Statistics Sent:
total—Total number of received packets
errors—Error packets received
Example
host1#show ipv6 traffic
IPv6 statistics:
Rcvd:
0 total, 0 local destination
0 hdr errors, 0 addr errors
0 unkn proto, 0 discards
Sent:
0 forwarded, 0 generated
0 out disc
Mcast: 0 received 0 forwarded
Routes: 7 in routing table
Chapter 2: Configuring IPv6
177
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE FOR E SERIES 11.3.X - IP-IPV6-IGP CONFIGURATION GUIDE 2010-10-31 and is the answer not in the manual?
Questions and answers