Table of Contents
Advertisement
show ipv6 static
show ipv6 traffic
Copyright © 2010, Juniper Networks, Inc.
Router FE80::290:27FF:FE8C:B709 on FastEthernet2/1, last update 0 min
Hops 64, Lifetime 1800 sec, AddrFlag=0, OtherFlag=0
Reachable time 0 msec, Retransmit time 0 msec
Example 2
host1#show ipv6 routers conflicts
Router FE80::203:FDFF:FE34:7039 on FastEthernet1/0, last update 1 min,
CONFLICT
Hops 64, Lifetime 1800 sec, AddrFlag=0, OtherFlag=0
Reachable time 0 msec, Retransmit time 0 msec
Prefix 2003::/64 onlink autoconfig
Valid lifetime -1, preferred lifetime -1
See show ipv6 routers
Use to display the status of static routes in the routing table.
You can specify an IP mask that filters specific routes.
Field descriptions
Prefix—IP address prefix
Length—Prefix length
Next Hop—IP address of the next hop
Dst—Administrative distance of the route
Met—Number of hops
Interface—Interface type and interface specifier
Example
host1# show ipv6 static
Prefix/Length
-------------------- -------------------- ------- ------------------
6::/64
2003::/16
See show ipv6 static
Use to display statistics about IPv6 traffic.
Field descriptions
IPv6 statistics Rcvd:
total—Total number of packets received
local destination—Number of packets received with this router as their destination
hdr errors—Number of packets containing header errors
addr errors—Number of packets containing addressing errors
NextHop
Dst/Met
5::2
1/0
5::1
1/0
Chapter 2: Configuring IPv6
Interface
ATM4/0.15
ATM4/0.15
175
Advertisement
Table of Contents
