Copyright © 2010, Juniper Networks, Inc.
Operational MTU 1500 Administrative MTU 0
Operational speed 100000000 Administrative speed 0
Creation type Static
Neighbor Discovery is disabled
In Received Packets 0, Bytes 0
Unicast Packets 0, Bytes 0
Multicast Packets 0, Bytes 0
In Total Dropped Packets 0, Bytes 0
In Policed Packets 0
In Invalid Source Address Packets 0
In Error Packets 0
In Discarded Packets 0
Out Forwarded Packets 0, Bytes 0
Unicast Packets 0, Bytes 0
Multicast Routed Packets 0, Bytes 0
Out Total Dropped Packets 0, Bytes 0
Out Scheduler Dropped Packets 0, Bytes 0
Out Policed Packets 0
Out Discarded Packets 0
IPv6 policy input ipv6InPol25
rate-limit-profile Rlp2Mb classifier-group clgA entry 1
Committed: 0 packets, 0 bytes
Conformed: 0 packets, 0 bytes
Exceeded:
0 packets, 0 bytes
rate-limit-profile Rlp8Mb
Committed: 0 packets, 0 bytes
Conformed: 0 packets, 0 bytes
Exceeded:
0 packets, 0 bytes
IPv6 policy output ipv6PolOut2
rate-limit-profile RlpOutA classifier-group clgB entry 1
Committed: 0 packets, 0 bytes
Conformed: 0 packets, 0 bytes
Exceeded:
0 packets, 0 bytes
rate-limit-profile RlpOutB
Committed: 0 packets, 0 bytes
Conformed: 0 packets, 0 bytes
Exceeded:
0 packets, 0 bytes
IPv6 policy local-input ipv6PolLocIn5
rate-limit-profile Rlp1Mb classifier-group clgC entry 1
Committed: 0 packets, 0 bytes
Conformed: 0 packets, 0 bytes
Exceeded:
0 packets, 0 bytes
rate-limit-profile Rlp5Mb
Committed: 0 packets, 0 bytes
Conformed: 0 packets, 0 bytes
Exceeded:
0 packets, 0 bytes
queue 0: traffic class best-effort, bound to ipv6 FastEthernet9/0.6
Queue length 0 bytes
Forwarded packets 0, bytes 0
Dropped committed packets 0, bytes 0
Dropped conformed packets 0, bytes 0
Dropped exceeded packets 0, bytes 0
Example 4
host1#show ipv6 interface FastEthernet 9/0.6
FastEthernet9/0.6 line protocol VlanSub is up, ipv6 is up
Description: IPv6 interface in Virtual Router Hop6
Chapter 2: Configuring IPv6
159
Need help?
Do you have a question about the JUNOSE SOFTWARE FOR E SERIES 11.3.X - IP-IPV6-IGP CONFIGURATION GUIDE 2010-10-31 and is the answer not in the manual?
Questions and answers