Table of Contents
Advertisement
JunosE 11.3.x IP, IPv6, and IGP Configuration Guide
show ipv6 redistribute
show ipv6 route
172
Enforce first AS is disabled
Missing MED as worst is disabled
Route flap dampening is disabled
Log neighbor changes is disabled
Fast External Fallover is disabled
No maximum received AS-path length
BGP administrative distances are 20 (ext), 200 (int), and 200 (local)
Client-to-client reflection is enabled
Cluster ID is 1.1.1.1
Route-target filter is enabled
Default IPv4-unicast is enabled
Local-RIB version 8. FIB version 8.
Neighbor(s):
No neighbors are configured
Routing for Networks:
Aggregate Generation for Unicast Routes:
Example 2
host1#show ipv6 protocols summary
bgp 100
See show ipv6 protocols
Use to display configured route redistribution policy.
Field descriptions
To—Protocol that routes are distributed into
From—Protocol that routes are distributed from
status—Redistribution status
route map name—Name of the route map
Example
host1#show ipv6 redistribute
To bgp, From static is enabled with route map foo
To bgp, From connected is enabled without a route map
See show ipv6 redistribute
Use to display the current state of the routing table, including routes not used for
forwarding.
You can display all routes, a specific route, detailed information about all or a specific
route, or summary counters for the routing table.
Field descriptions
Prefix—IPv6 address prefix
Length—Prefix length
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
