Table of Contents
Advertisement
show ip address
Copyright © 2010, Juniper Networks, Inc.
IP Router Id—Router ID number
Router Name—Router name
Default TTL—Default IP TTL (time-to-live) value
Reassemble Timeout—Amount of time (in minutes) IP waits for missing packet
fragments before it drops the fragments it is holding
SA Validate Trap—Whether the source address validation trap is enabled
Example
host1#show ip
IP Router Id: 192.168.1.155
Router Name: default
Default TTL: 60
Reassemble Timeout: 30
SA Validate Trap: false
See show ip
Use to display detailed or summary information about a particular IP interface.
Specify a VRF name to view information for only that VRF.
Use the brief keyword to display summary information about the interface.
Use the detail keyword to display detailed information about the interface.
Field descriptions
Network Protocols—Network protocols configured on this interface
Internet address—IP address and subnet mask of this interface
Broadcast address—Broadcast address of this interface
Operational MTU—MTU of this interface
Administrative MTU—Value of the MTU if it has been administratively overridden
using the configuration
Operational speed—Speed of the interface
Administrative speed—Value of the speed if it has been administratively overridden
using the configuration
Discontinuity Time—Value of the SysUpTime when the interface statistics last started
being valid
Router advertisement—Status of router discovery advertisement: enabled, disabled
Proxy Arp—Status of the feature: enabled, disabled
Administrative debounce-time—Configured debounce behavior, enabled or disabled.
If enabled, indicates time in milliseconds that the router waits before generating an
Chapter 1: Configuring IP
81
Advertisement
Table of Contents
