show hosts
show isis database
Copyright © 2010, Juniper Networks, Inc.
Example
host1#debug isis adj-packets
Use the no version to disable debugging display.
See debug isis
Use to display the name-to-NSAP mappings defined with the clns host command.
Field descriptions
Static Host Table
name—Name assigned to the host
ip address—Host IP address
type—Type of host
username—Username necessary to access the host
password—Password necessary to access the host
Clns Host Alias Table
name—Name of the host alias
area address—Area address of the host alias
system ID—Six-byte value of the host alias
type—Type of host alias
Example
host1:abc#show hosts
Static Host Table
-----------------
name
ip address
----
----------
jkk
10.10.0.73
Clns Host Alias Table
---------------------
name
area address
----- -------------------------------- ----------------- ------
fred
47.0005.80FF.F800.0000.0001.0001 0000.0000.0011.00 static
karen 47.0005.80FF.F800.0000.0001.0001 0000.0000.0012.00 static
See show hosts
Use to display IS-IS link-state database information.
Request specific show isis database statistics by selecting from these options:
type
username
password
----
---------
--------
ftp
anonymous
null
system ID
Chapter 6: Configuring IS-IS
type
379