Table of Contents
Advertisement
JunosE 11.3.x IP, IPv6, and IGP Configuration Guide
show ip community-list
show ip forwarding-table slot
84
permit
^108_
deny
.*
See show ip as-path-access-list
Use to display routes that are permitted by a BGP community list.
Example
host1#show ip community-list
Community List 1:
permit 752877569 (11488:1)
permit 752877570 (11488:2)
permit 752877571 (11488:3)
permit 752877572 (11488:4)
Community List 2:
permit 4294967043 (local-as)
See show ip community-list
Use to display details on the forwarding table for a specific line module, including the
memory used by each virtual router configured on the line module and free memory
available on the module.
The Load Errors field records any failed routing table distribution attempt as an error.
Attempts can fail for many reasons during normal operation; a failed attempt does
not necessarily indicate a problem. It is normal to see many Load Errors per day.
If the Status field does not indicate Valid, then the routing table distribution has failed
constantly for that VR. It is normal and appropriate behavior for the Status field to
indicate Valid while the Load Error field increases daily.
Field descriptions
Free Memory—Amount of routing table memory free on the line module, in kilobytes
Virtual Router—Name of the virtual routers configured on the line module
Memory (KB)—Amount of routing table memory consumed by the virtual router, in
kilobytes
Load Errors—Count of errors made while loading the routing table on the line module
Status—Whether the routing table for the virtual router is valid
Example
host1#show ip forwarding-table slot 9
Free Memory = 3,166KB
Virtual Router
----------------
vr1
vr2
vr3
Memory
Load Errors
(KB)
---------
-------------
4128
0
3136
0
2256
0
Copyright © 2010, Juniper Networks, Inc.
Status
--------
Valid
Valid
Valid
Advertisement
Table of Contents
