Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - IP-IPV6-IGP CONFIGURATION GUIDE 2010-10-31 Configuration Manual page 109

Software for e series broadband services routers ip, ipv6, and igp configuration guide
Table of Contents

Advertisement

show ip interface
Copyright © 2010, Juniper Networks, Inc.
default
-----------------------------------------------------------
See show ip forwarding-table slot
Use to display the current state of all IP interfaces or the IP interfaces you specify.
The default is all interface types and all interfaces.
The show-virtual-router-keyword displays virtual router information.
Field descriptions
interface—Interface type and interface specifier
interface status—Status of the interface
HTTP Redirect Url—Url to which a subscriber's initial web browser session is redirected
line protocol—Status of the line protocol
Description—Text description or alias if configured for the interface
Link up/down trap—Status of SNMP link up/down traps on the interface
Internet address—IP address of the interface
IP Statistics Rcvd:
local destination—Frames with this router as their destinations
hdr errors—Number of packets containing header errors
addr errors—Number of packets containing addressing errors
unkn proto—Number of packets received containing unknown protocols
discards—Number of discarded packets
IP Statistics Frags:
reasm ok—Number of reassembled packets
reasm req—Number of requests for reassembly
reasm fails—Number of reassembly failures
frag ok—Number of packets fragmented successfully
frag req—Number of frames requiring fragmentation
frag fails—Number of packets unsuccessfully fragmented
IP Statistics Sent:
generated—Number of packets generated
no routes—Number of packets that could not be routed
1024
0
Chapter 1: Configuring IP
Valid
85

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.3

Table of Contents