Table of Contents
Advertisement
show ip protocols
Copyright © 2010, Juniper Networks, Inc.
Example
host1#show ip profile foo
IP profile : foo
IP address
Unnumbered interface
Router
Directed Broadcast
ICMP Redirects
Access Route Addition
Network Address Translation: Enabled, domain inside
Source-Address Validation
Ignore DF Bit
Administrative MTU
Auto Detect
Auto Configure
Auto Detect
IP FlowStats
See show ip profile
Use to display configured protocols.
Field descriptions
For BGP:
Redistributing—Protocol to which BGP is redistributing routes
Default local preference—Local preference value
IGP synchronization—Status of IGP synchronization: enabled, disabled
Always compare MED—Status of multiexit discrimination: enabled, disabled
Router flap damping—Status of route dampening: enabled, disabled
Administrative Distance—External, internal, and local administrative distances
Neighbor Address—IP address of the BGP neighbor
Neighbor Incoming/Outgoing update distribute list—Number of the access list for
outgoing routes
Neighbor Incoming/Outgoing update prefix list—Number of the prefix list for
incoming or outgoing routes
Neighbor Incoming/Outgoing update prefix tree—Number of the prefix tree for
incoming or outgoing routes
Neighbor Incoming/Outgoing update filter list—Number of filter list for incoming
routes
Routing for Networks—Network for which BGP is currently injecting routes
For IS-IS:
: none
: none
:
: Enabled
: Disabled
: Enabled
: Enabled
: Disabled
: 0
: Disabled
: Disabled
: Disabled
: Enabled
Chapter 1: Configuring IP
93
Advertisement
Table of Contents
