Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - IP-IPV6-IGP CONFIGURATION GUIDE 2010-10-31 Configuration Manual page 103

show access-list
Copyright © 2010, Juniper Networks, Inc.
To Display
Routes
Interfaces and next hops
Socket statistics
Static routes
TCP ACK, RST, and SYN protection
status
Black hole threshold information
TCP statistics
Traffic
UDP statistics
Profiles
Route maps
To set a statistics baseline for IP interfaces, use the baseline tcp and baseline ip udp
commands. Use the delta keyword with IP show commands to specify that baselined
statistics are to be shown.
You can use the output filtering feature of the show command to include or exclude lines
of output based on a text string that you specify. See JunosE System Basics Configuration
Guide, for details.
Use to display information about access lists, including the instances of each access
list.
Example
host1#show access-list
IP Access List 1:
permit ip 172.31.192.217 0.0.0.0 0.0.0.0 255.255.255.255
permit ip 12.40.0.0 0.0.0.3 0.0.0.0 255.255.255.255
deny ip 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255
IP Access List 2:
permit ip 172.19.0.0 0.0.255.255 0.0.0.0 255.255.255.255
deny ip 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255
IP Access List 10:
permit ip 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255
IP Access List 11:
deny ip 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255
See show access-list
Command
"show ip route" on page 96
"show ip route slot" on page 99
"show ip socket statistics" on page 100
"show ip static" on page 103
"show tcp ack-rst-and-syn" on page 104
"show tcp path-mtu-discovery" on page 106
"show tcp statistics" on page 106
"show ip traffic" on page 115
"show ip udp statistics" on page 119
"show ip profile" on page 92
"show route-map" on page 120
Chapter 1: Configuring IP
79