Table of Contents
Advertisement
JunosE 11.3.x IP, IPv6, and IGP Configuration Guide
show ip ospf neighbors
show ipv6 ospf neighbors
310
Neighbor allocation failures:0
LSA allocation failures:0
LSA HDR allocation failures:0
DB Request allocation failures:0
RTX allocation failures:0
LS Ack allocation failures:0
DD pkt allocation failures:0
OSPF interface allocation failures:0
OSPF general packet allocation failures:0
Example 2
host1#show ipv6 ospf internal-statistics
Routing Process OSPFv3 1 with Router ID 1.1.1.1
Internal OSPF Statistics, bytes allocated/free:
LSA bytes allocated:
Router LSA bytes allocated:
Summary bytes allocated:
Timers bytes allocated:
Ospf total bytes free:
Ospf heap total bytes allocated:
Internal OSPF Statistics, allocation failures:
Neighbor allocation failures:
LSA allocation failures:
LSA HDR allocation failures:
DB Request allocation failures:
RTX allocation failures:
LS Ack allocation failures:
DD pkt allocation failures:
OSPF interface allocation failures:
OSPF general packet allocation failures: 0
See show ip ospf internal-statistics
See show ipv6 ospf internal-statistics
See show ip ospf neighbors
Use to display information about OSPF neighbors on a per-interface basis.
Use the optional areaId or areaIdInt values, in the show ipv6 ospf neighbors command,
to specify an OSPFv3 area ID in either IP or decimal format.
You can use the history keyword with the show ip ospf neighbors command to display
a history of up to 10 events for all OSPF neighbors or a specific OSPF neighbor. This
neighbor uptime tracking feature is not available for OSPFv3. For more information,
see "Neighbor Uptime Tracking" on page 292.
Field descriptions
Neighbor ID—Neighbor's router ID
Pri—Router priority of neighbor
State—OSPF neighbor's state
39
1314774
0
96
16
1000
0
0
0
0
0
0
0
0
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
