Table of Contents
Advertisement
JunosE 11.3.x IP, IPv6, and IGP Configuration Guide
show isis mpls adjacency-log
show isis mpls advertisements
384
Use to display a log of the last 20 IS-IS adjacency changes.
Field descriptions
When—Amount of time since recording the log entry
Neighbor ID—Identifier for the neighbor
IP Address—IP address of the neighbor
Interface—Interface from which neighbor was learned
Status—Adjacency status, Up or Down
Level—IS-IS routing level
Example
host1#show isis mpls adjacency-log
IS-IS MPLS TE log
When
Neighbor ID
02:25:47
2220.0900.2002.00
02:25:47
2220.0900.2002.00
02:25:47
2220.0900.4004.00
See show isis mpls adjacency-log
Use to display the last record flooded from MPLS.
Field descriptions
System ID—Name or system ID of the MPLS tail-end (destination) router
Router ID—Router ID for the router
Link Count—Number of links that MPLS advertises
Neighbor System ID—Identifier of the remote system in an area
Administrative group—TLV administrative group or color assigned to the link
Interface IP address—IP address of the interface
Neighbor IP Address—IP address of the neighbor
Maximum link bandwidth—Bandwidth capacity of the link in bits per second
Reservable link bandwidth—Amount of bandwidth reservable on the link (whether
reserved or not)
Unreserved bandwidth—Amount of bandwidth available for reservation on the link
TE default metric—Traffic engineering default metric value
Affinity Bits—Attributes flooded for the link
IP Address
Interface Status
221.1.1.2
at2/0.1
Up
221.1.6.2
at2/0.6
Up
221.1.4.4
at2/1.5
Up
Copyright © 2010, Juniper Networks, Inc.
Level
L1
L1
L1
Advertisement
Table of Contents
