Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - IP-IPV6-IGP CONFIGURATION GUIDE 2010-10-31 Configuration Manual page 331

show ip ospf interface
show ipv6 ospf interface
Copyright © 2010, Juniper Networks, Inc.
Length: 124
Link Type: P2P
Link ID: 1744896257
Local Address 14.1.1.2
Remote Address 14.1.1.1
TE Metric 0
Max BW 1000 kb/sec (125000 Bps)
Max Reservable BW 1000 kb/sec (125000 Bps)
Max Unreserved BW : pri 0 1000 kb/sec (125000 Bps)
Max Unreserved BW : pri 1 1000 kb/sec (125000 Bps)
Max Unreserved BW : pri 2 1000 kb/sec (125000 Bps)
Max Unreserved BW : pri 3 1000 kb/sec (125000 Bps)
Max Unreserved BW : pri 4 1000 kb/sec (125000 Bps)
Max Unreserved BW : pri 5 1000 kb/sec (125000 Bps)
Max Unreserved BW : pri 6 1000 kb/sec (125000 Bps)
Max Unreserved BW : pri 7 1000 kb/sec (125000 Bps)
Color 0
See show ip ospf database
Use to display a list of OSPFv2 or OSPFv3 interfaces.
Use the optional areaId or areaIdInt values to specify an OSPF area ID in either IP or
decimal format.
Field descriptions
Interface value (fastEthernet)—Status of the physical link and the operational status
of the protocol
Internet Address—Interface IP address
Area—Area identifier: IP address
Network type—Broadcast, NBMA, Point-to-Point, or Point-to-Multipoint
Authentication type—None, simple, or MD5
Cost—Metric for OSPF transmission
Transmit Delay—Time between transmissions from the specified interface
Interface State—Current state of the specified interface
Priority—Router's priority on the specified interface
Designated Router—Designated router ID and respective interface IP address
Backup Designated Router—Designated router ID and respective interface IP address
of the backup router
Timer intervals—Configuration of timer intervals: Hello, Dead, Wait, and Retransmit
Neighbor Count—Number of neighbors and their state; adjacent neighbors
Chapter 5: Configuring OSPF
307