Table of Contents
Advertisement
JunosE 11.3.x IP, IPv6, and IGP Configuration Guide
394
L1L2—Router adjacency for level 1 and level 2 routing
L2—Router adjacency for level 2 only
Priority—IS-IS priority that the respective neighbor is advertising. The highest-priority
neighbor becomes the designated IS-IS router for the interface.
Circuit Id—Neighbor's idea of what the designated IS-IS router is for the interface
Add the detail keyword to display area addresses and IP addresses.
Example 1—For IS-IS IP configuration
host1#show clns
Global CLNS Information:
3 Interfaces Enabled for CLNS
NET: 47.0005.80FF.F800.0000.0001.0001.0000.0000.3333.00
Configuration Timer: 10, Default Holding Timer: 30, Packet Lifetime:
1200
Intermediate system operation enabled
IS-IS level-1-2 Router: testnet
Routing for Area: 47.0005.80FF.F800.0000.0001.0001
Distribution domain wide enabled
Area Authentication:
PSNP PDU authentication enabled
Key-id:
1 Type: hmac-md5
Start Accept:
Start Generate: FRI JAN 14 09:59:41 2000
Stop Accept:
Stop Generate:
Domain Authentication:
PSNP PDU authentication enabled
CSNP PDU authentication enabled
Key-id:
1 Type: hmac-md5*
Start Accept:
Start Generate: WED JAN 12 19:03:52 2000
Stop Accept:
Stop Generate:
Example 2—For IS-IS IPv6 configuration
host1:2#show clns
Global CLNS Information:
3 Interfaces Enabled for CLNS
NET: 49.0001.0040.0400.4002.00
Configuration Timer: 10, Default Holding Timer: 30, Packet Lifetime: 30
Intermediate system operation enabled
IS-IS level-1-2 Router:
Routing for Area: 49.0001
Ip route-type both
Example 3—For IS-IS adjacencies
host1#show clns is-neighbors
System Id
Interface
0000.0000.7500 atm2/0.111
Example 4—For detailed information on IS-IS adjacencies
FRI JAN 14 09:57:41 2000
0
0
WED JAN 12 19:01:52 2000
0
0
State
Type Priority
up
L1L2 127
Copyright © 2010, Juniper Networks, Inc.
Circuit Id
0000.0000.0000.00
Advertisement
Table of Contents
