Table of Contents
Advertisement
JunosE 11.3.x IP, IPv6, and IGP Configuration Guide
114
host1#show ip tcp statistics diagnostic
...
Global Diagnostic Data
Unknown Connection log
Source address/port -> local port
128.127.126.125/124 -> 8080
111.111.111.111/222 -> 3333
# connection-reqs rejected: 0
# connection-reqs pending: 0
# sonewconn calls that fail: 0
...
Diagnostics:
PRU_ Operations counters:
PRU_ATTACH: 0
PRU_DETACH: 0
PRU_BIND: 1
PRU_LISTEN: 1
PRU_CONNECT: 0
PRU_ACCEPT: 0
PRU_DISCONNECT: 0
PRU_SHUTDOWN: 0
PRU_RCVD: 0
PRU_SEND: 0
PRU_ABORT: 0
PRU_CONTROL: 0
PRU_SENSE: 0
PRU_RCVOOB: 0
PRU_SENDOOB: 0
PRU_SOCKADDR: 0
PRU_PEERADDR: 0
PRU_CONNECT2: 0
PRU_FASTTIMO: 0
PRU_SLOWTIMO: 0
PRU_PROTORCV: 0
PRU_PROTOSEND: 0
Wildcard Matches: 2
Rcv'd Packets after connection closed: 0
Connect request rejected: 0
Connect request approval pending 0
New soconnect failed 0
# Write-Wakeups: 0
# Read wakeups 0
# receives after close 0
Retransmit timer: 0
Persistance timer: 0
Keepalive timer: 0
2MSL timer: 0
tcpDisconnect()s: 0
keep T/O pre-estab: 0
tcpkeeptimeo_idle: 0
...
TCP Connection Event Log (most recent at bottom)
TCPS_ELOG_PRU_ATTACH
TCPS_ELOG_PRU_BIND
Example 3—Additional fields displayed by detailed keyword
host1#show ip tcp statistics detailed
...
count: 3
count: 4
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE FOR E SERIES 11.3.X - IP-IPV6-IGP CONFIGURATION GUIDE 2010-10-31 and is the answer not in the manual?
Questions and answers