Table of Contents
Advertisement
JunosE 11.3.x IP, IPv6, and IGP Configuration Guide
show ipv6 routers
174
1 ldp tunnel routes
1 rsvp tunnel routes
Last route added/deleted: 2::4/128 by BGP Tunnel
At MON FEB 04 2008 14:18:26 UTC
Example 3
host1#show ipv6 route 5::/64 detail
5::/64 Type:local
NextHop: 1::2
See show ipv6 route
Use to display IPv6 router advertisement information received.
Use the conflicts keyword to display router advertisements that differ from the
advertisements configured
Field descriptions
Route—Router for which this information applies
Hops—Number of hops that the router uses in router advertisements
Lifetime—Lifetime (in seconds) of the neighbor discovery router advertisement
AddrFlag—State of the neighbor discovery router advertisement managed flag
OtherFlag—State of the neighbor discovery router advertisement other config flag
Reachable time—Amount of time (in milliseconds) that the neighbor is expected to
remain reachable
Retransmit time—Interval in which the router retransmits neighbor solicitations
Prefix—IPv6 network number to include in router advertisements
Autoconfig—When present, indicates that local host links use the specified prefix
for IPv6 autoconfiguration
Valid lifetime—Amount of time in seconds that the router advertises the IPv6 prefix
as valid
preferred lifetime—Amount of time in seconds that the router advertises the specified
IPv6 prefix as preferred
Example 1
host1#show ipv6 routers
Router FE80::83B3:60A4 on FastEthernet2/0, last update 3 min
Hops 0, Lifetime 6000 sec, AddrFlag=0, OtherFlag=0
Reachable time 0 msec, Retransmit time 0 msec
Prefix 3FFE:C00:8007::800:207C:4E37/96 autoconfig
Valid lifetime -1, preferred lifetime -1
Distance:0
Metric:0
IntfIndex 10007 Intf ATM4/0.15
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
