Clear Config - NETGEAR FSM726E-100NAS Administration Manual

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
Table 1-1. Quick Start Commands (continued)
Command
copy nvram:startup-
config <tftp://
<ipaddress>/
<filepath>/<filename>>
copy nvram:errorlog
<tftp://<ipaddress>/
<filepath>/<filename>>
copy nvram:traplog
<tftp://<ipaddress>/
<filepath>/<filename>>
copy <tftp://
<ipaddress>/
<filepath>/<filename>>
nvram:startup-config
copy <tftp://
<ipaddress>/
<filepath>/<filename>>
system:image
copy <tftp://
<ipaddress>/
<filepath>/<filename>>
nvram:startup-config
copy <tftp://
<ipaddress>/
<filepath>/<filename>>
system:image

clear config

1-8
Mode
Privileged Starts the configuration file upload, displays the mode and
EXEC type of upload and confirms the upload is progressing.
The URL must be specified as:
xmodem:<filepath>/<filename>
For example:
If the user is using HyperTerminal, the user must specify
where the file is going to be received by the PC.
Privileged Starts the error log upload, displays the mode and type of
EXEC upload and confirms the upload is progressing.
The URL must be specified as:
xmodem:<filepath>/<filename>
Privileged Starts the trap log upload, displays the mode and type of
EXEC upload and confirms the upload is progressing.
The URL must be specified as:
xmodem:<filepath>/<filename>
Privileged Sets the destination (download) datatype to be an image
EXEC (system:image) or a configuration file (nvram:startup-config).
The URL must be specified as:
xmodem:<filepath>/<filename>
For example:
If the user is using Hyper Terminal, the user must specify
which file is to be sent to the networking device.
The Networking Device restarts automatically once the code
has been downloaded.
Privileged Sets the destination (download) datatype to be an image
EXEC (system:image) or a configuration file (nvram:startup-config).
The URL must be specified as:
xmodem:<filepath>/<filename>
Privileged Sets the destination (download) datatype to be a configuration
EXEC file. The URL must be specified as:
tftp://<ipaddress>/<filepath>/<filename>
Before starting a TFTP server download, you must configure
the IP address.
Privileged Sets the destination (download) datatype to be an image.
The URL must be specified as:
EXEC
tftp://<ipaddress>/<filepath>/<filename>
The system:image option downloads the code file.
Privileged Enter yes when the prompt asks if you want to clear all the
EXEC configurations made to the networking device.
v1.0, November 2008
Description
Getting Started