Ip Igmpsnooping Querier Query-Interval; Show Ip Igmpsnooping Querier - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Reference Manual
Layer-3 stackable switches, software version 7.3
Hide thumbs
Also See for GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch:
- Cli manual (787 pages) ,
- Hardware installation manual (42 pages) ,
- Administration manual (561 pages)
Table of Contents
Advertisement
Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
15.3.3 ip igmpsnooping querier query-interval
To configure the IGMP querier query interval <interval> for a VLAN <vlan-id>, use the
ip igmpsnooping querier query-interval command. Valid range for <interval> is 1 to
18000 seconds. <Vlan-id> must be a defined VLAN.
Format
Mode
Default
15.3.4 show ip igmpsnooping querier
To display IGMP querier configuration information use show ip igmpsnooping querier
command. To display global querier information use show ip igmpsnooping querier. To
display VLAN specific querier information with the <vlan-id> option,
Format
Mode
IGMP Snooping Commands
[no] ip igmpsnooping querier query-interval
id> <interval>
Global Config
interval, 60
show ip igmpsnooping querier
Privileged EXEC Mode
v4.1, October 2008
<vlan-
[<vlan-id>]
15-11
Advertisement
Chapters
Table of Contents
