Displaying And Maintaining Cluster Configuration - H3C S3100 8C SI Operation Manual

Operation Manual – Stack-Cluster
H3C S3100 Series Ethernet Switches
Enter system view
Enter cluster view
Add the MAC address of a
specified device to the
cluster blacklist
Delete the specified MAC
address from the cluster
blacklist
Delete a device from the
cluster add this device to
the cluster blacklist
Displays the information
about the devices in the
cluster blacklist

2.3 Displaying and Maintaining Cluster Configuration

Display all NDP configuration and
running information (including the
interval to send NDP packets, the
holdtime, and all neighbors
discovered)
Display NDP configuration and
running information on specified
ports (including the neighbors
discovered by NDP on the ports)
Display global NTDP information
Display device information
collected by NTDP
Display status and statistics
information about the cluster
Display information about the
candidate devices of the cluster
Display information about the
member devices of the cluster
Operation
system-view
cluster
black-list add-mac
mac-address
black-list delete-mac
mac-address
delete-member
member-id
[ to-black-list ]
display cluster
black-list
Operation
Command
Command
display ndp
display ndp interface
port-list
display ntdp
display ntdp device-list
[ verbose ]
display cluster
display cluster
candidates
[ mac-address H-H-H |
verbose ]
display cluster members
[ member-number |
verbose ]
2-21
Chapter 2 Cluster
Description
—
—
Optional
By default, the cluster
blacklist is empty.
Optional
Optional
Optional
This command can be
executed in any view.
Description
You can execute
the display
command in any
view.