H3C S3100 8C SI Operation Manual page 855

Operation Manual – HWPing
H3C S3100 Series Ethernet Switches
Create a HWPing test
group and enter its view
Configure the test type
Configure the destination
IP address
Configure the source IP
address
Configure the source port
Configure the number of
probes per test
Configure the maximum
number of history records
that can be saved
Configure the automatic
test interval
Configure the probe
timeout time
Configure the type of
service
Configure the type of FTP
operation
Operation
hwping
administrator-name
operation-tag
test-type ftp
destination-ip ip-address
source-ip ip-address
source-port port-number
count times
history-records number
frequency interval
timeout time
tos value
ftp-operation { get | put }
Chapter 1 HWPing Configuration
Command
1-9
Description
Required
By default, no test group
is configured.
Required
By default, the test type is
ICMP.
Required
By default, no destination
address is configured.
Required
By default, no source IP
address is configured.
Optional
By default, no source port
is configured.
Optional
By default, each test
makes one probe.
Optional
By default, the maximum
number is 50.
Optional
By default, the automatic
test interval is zero
seconds, indicating no
automatic test will be
made.
Optional
By default, a probe times
out in three seconds.
Optional
By default, the service
type is zero.
Optional
By default, the type of
FTP operation is get, that
is, the FTP operation will
get a file from the FTP
server.