Operation Manual – QoS-QoS Profile
H3C S3100 Series Ethernet Switches
I. Configuration prerequisites
The ACL rules for traffic classification are defined. Refer to the ACL module of this
manual for information about defining ACL rules.
II. Configuration procedure
You can generate traffic statistics or clear traffic statistics on all the packets matching
specific ACL rules, or on packets that match specific ACL rules and are of a VLAN, of a
port group, or pass a port.
Table 1-29 Generate traffic statistics on all the packets matching specific ACL rules
Enter system view
Generate the statistics on the packets
matching specific ACL rules
Clear the statistics on the packets
matching specific ACL rules
Table 1-30 Generate traffic statistics on packets that are of a VLAN and match specific
ACL rules
Enter system view
Generate the statistics on the packets
matching specific ACL rules
Clear the statistics on the packets
matching specific ACL rules
Table 1-31 Generate traffic statistics on packets that are of a port group and match
specific ACL rules
Enter system view
Enter port group view
Generate the statistics on the packets
matching specific ACL rules
Clear the statistics on the packets
matching specific ACL rules
Operation
Operation
Operation
1-31
Chapter 1 QoS Configuration
Command
system-view
traffic-statistic
inbound acl-rule
reset traffic-statistic
inbound acl-rule
Command
system-view
traffic-statistic vlan
vlan-id inbound acl-rule
reset traffic-statistic
vlan vlan-id inbound
acl-rule
Command
system-view
port-group group-id
traffic-statistic
inbound acl-rule
reset traffic-statistic
inbound acl-rule
Description
—
Required
Optional
Description
—
Required
Optional
Description
—
—
Required
Optional
Need help?
Do you have a question about the H3C S3100 8C SI and is the answer not in the manual?