Operation Manual – QoS-QoS Profile
H3C S3100 Series Ethernet Switches
Table 1-18 Configure traffic policing for all the packets matching specific ACL rules
Operation
Enter system view
Configure traffic
policing
Clear the traffic
policing statistics
Table 1-19 Configure traffic policing for packets that are of a VLAN and match specific
ACL rules
Operation
Enter system
view
Configure
traffic policing
Clear the traffic
policing
statistics
Table 1-20 Configure traffic policing for packets that are of a port group and match
specific ACL rules
Operation
Enter system view
Enter port group
view
Configure traffic
policing
Clear the traffic
policing statistics
Command
system-view
traffic-limit inbound acl-rule target-rate
[ burst-bucket burst-bucket-size ]
[ conform con-action ] [ exceed
exceed-action ] [ meter-statistic ]
reset traffic-limit inbound acl-rule
Command
system-view
traffic-limit vlan vlan-id inbound acl-rule
target-rate [ burst-bucket
burst-bucket-size ] [ conform con-action ]
[ exceed exceed-action ] [ meter-statistic ]
reset traffic-limit vlan vlan-id inbound
acl-rule
Command
system-view
port-group group-id
traffic-limit inbound acl-rule target-rate
[ burst-bucket burst-bucket-size ]
[ conform con-action ] [ exceed
exceed-action ] [ meter-statistic ]
reset traffic-limit inbound acl-rule
1-24
Chapter 1 QoS Configuration
Description
—
Required
By default, traffic
policing is
disabled.
Optional
Description
—
Required
By default, traffic
policing is
disabled.
Optional
Description
—
—
Required
By default, traffic
policing is
disabled.
Optional
Need help?
Do you have a question about the H3C S3100 8C SI and is the answer not in the manual?