H3C S3100 8C SI Operation Manual page 54

Operation Manual – Login
H3C S3100 Series Ethernet Switches
Configure to authenticate
users locally or remotely
Configure
the
Console
port
Configure the command
level available to users
logging into the user
interface
Make terminal services
available to the user
interface
Set
number
screen can contain
Set history
buffer size
Operation
authentication-mod
e
[
authorization ]
Set the
speed speed-value
baud rate
Set the parity { even | none |
check mode odd }
Set the stop
stopbits { 1 | 1.5 | 2 }
bits
Set the data
databits { 7 | 8 }
bits
user privilege level
level
shell
the maximum
screen-length
of lines the
screen-length
command history-command
max-size value
Chapter 2 Logging in through the Console Port
Command
Required
The specified AAA scheme
determines
authenticate users locally or
scheme
remotely.
command-
By default, users logging in
through the Console port (AUX
user
authenticated.
Optional
The default baud rate of the
AUX port (also the Console
port) is 9,600 bps.
Optional
By default, the check mode of a
Console port is set to none,
that is, no check bit.
Optional
The default stop bits of a
Console port is 1.
Optional
The default data bits of a
Console port is 8.
Optional
By default, commands of level 3
are available to users logging
into the AUX user interface.
Optional
By default, terminal services
are
interfaces.
Optional
By default, the screen can
contain up to 24 lines.
You can use the screen-length
0 command to disable the
function to display information
in pages.
Optional
The default history command
buffer size is 10. That is, a
history command buffer can
store up to 10 commands by
default.
2-14
Description
whether
interface) are
available in all user
to
not