H3C S3100 8C SI Operation Manual page 856

Operation Manual – HWPing
H3C S3100 Series Ethernet Switches
Configure an FTP login
username
Configure an FTP login
password
Configure a file name for
the FTP operation
Start the test
Display test results
4) Configuring HTTP test on HWPing client
Table 1-8 Configure HTTP test on HWPing client
Enter system view
Enable the HWPing client
function
Create a HWPing test
group and enter its view
Configure the test type
Configure the destination
IP address
Operation
username name
password password
filename file-name
test-enable
display hwping results
[ admin-name
operation-tag ]
Operation
system-view
hwping-agent enable
hwping
administrator-name
operation-tag
test-type http
destination-ip
ip-address
Chapter 1 HWPing Configuration
Command
Command
—
Required
By default, the HWPing
client function is disabled.
Required
By default, no test group is
configured.
Required
By default, the test type is
ICMP.
Required
By default, no destination
address is configured.
1-10
Description
Required
By default, neither
username nor password
is configured.
Required
By default, no file name is
configured for the FTP
operation
Required
Required
You can execute the
command in any view.
Description
When you use
S3100-EI Series
Switches as HWPing
Client for http test, the
destination address can
be host name or IP
address.
When you use
S3100-SI Series
Switches as HWPing
Client for http test, the
destination address can
only be IP address.
H3C
H3C