Sftp Configuration; Sftp Configuration: A Switch Operating As An Sftp Server - H3C S3100 8C SI Operation Manual

Operation Manual – FTP-SFTP-TFTP
H3C S3100 Series Ethernet Switches
[ftp] get switch.bin
# Execute the quit command to terminate the FTP connection and return to user view.
[ftp] quit
<Sysname>
# After downloading the file, use the boot boot-loader command to specify the
downloaded file (switch.bin) to be the application for next startup, and then restart the
switch. Thus the switch application is upgraded.
<Sysname> boot boot-loader switch.bin
<Sysname> reboot
Note:
For information about the boot boot-loader command and how to specify the startup
file for a switch, refer to the "System Maintenance and Debugging" module of this
manual.

1.3 SFTP Configuration

Table 1-10 SFTP configuration tasks
SFTP Configuration: A
Switch Operating as an
SFTP Server
SFTP Configuration: A
Switch Operating as an
SFTP Client

1.3.1 SFTP Configuration: A Switch Operating as an SFTP Server

I. Enabling an SFTP server
Before enabling an SFTP server, you need to enable the SSH server function and
specify the service type of the SSH user as SFTP or all. For details, see the SSH server
configuration part of SSH Operation Manual of this manual.
Item
Enabling an SFTP server
Configuring connection idle time
Supported SFTP client software
Basic configurations on an SFTP
client
Chapter 1 FTP and SFTP Configuration
Configuration task
1-13
Description
Required
Optional
—
—