Command Edit - H3C S3100 8C SI Operation Manual

Operation Manual – CLI
H3C S3100 Series Ethernet Switches
Wrong parameter
found at '^' position

1.4.5 Command Edit

The CLI provides basic command edit functions and supports multi-line editing. The
maximum number of characters a command can contain is 254.
edit operations.
Table 1-11 Edit operations
A common key
Backspace key
Left arrow key or <Ctrl+B>
Right arrow key or <Ctrl+F>
Up arrow key or <Ctrl+P>
Down arrow key or <Ctrl+N>
<Tab>
Error message
Press...
Description
A parameter entered is wrong.
An error is found at the '^' position.
Insert the corresponding character at the cursor
position and move the cursor one character to
the right if the command is shorter than 254
characters.
Delete the character on the left of the cursor and
move the cursor one character to the left.
Move the cursor one character to the left.
Move the cursor one character to the right.
Display history commands.
Use the partial online help. That is, when you
input an incomplete keyword and press <Tab>,
if the input parameter uniquely identifies a
complete keyword, the system substitutes the
complete keyword for the input parameter; if
more than one keywords match the input
parameter, you can display them one by one (in
complete form) by pressing <Tab> repeatedly; if
no keyword matches the input parameter, the
system displays your original input on a new line
without any change.
1-15
Chapter 1 CLI Configuration
Table 1-11 lists the CLI
To...