Configuring The Ssh Client; Ssh Client Configuration Task List - H3C S3100 8C SI Operation Manual

Operation Manual – SSH
H3C S3100 Series Ethernet Switches
Table 1-11 Follow these steps to export the RSA public key:
Enter system view
Display the RSA key on the
screen in a specified format or
export it to a specified file
Table 1-12 Follow these steps to export the DSA public key:
Enter system view
Display the DSA key on the
screen in a specified format or
export it to a specified file
Note:
The DSA public key format can be SSH2 and OpenSSH, while the RSA public key
format can be SSH1, SSH2 and OpenSSH.

1.4 Configuring the SSH Client

The configurations required on the SSH client are related to the authentication mode
that the SSH server uses. In addition, if an SSH client does not support first-time
authentication, you need to configure the public key of the server on the client, so that
the client can authenticate the server.

1.4.1 SSH Client Configuration Task List

Table 1-13 Complete the following tasks to configure the SSH client:
Scenario
The authentication
mode is password
The authentication
mode is publickey
To do...
To do...
For a client running
SSH client software
Configuring an SSH
Client that Runs SSH
Client Software
Configuring an SSH
Client that Runs SSH
Client Software
Use the command...
system-view
public-key local export
rsa { openssh | ssh1 |
ssh2 } [ filename ]
Use the command...
system-view
public-key local export dsa
{ openssh | ssh2 }
[ filename ]
SSH client configuration task
For a client assumed by an
SSH2-capable switch
Configuring an SSH Client
Assumed by an SSH2-Capable
Switch
Configuring an SSH Client
Assumed by an SSH2-Capable
Switch
1-14
Chapter 1 SSH Configuration
Remarks
—
Required
Remarks
—
Required