H3C S3100 8C SI Operation Manual page 143

Operation Manual – Voice VLAN
H3C S3100 Series Ethernet Switches
Voice VLAN
assignment
mode
Automatic
Manual
IP phones acquiring IP address and voice VLAN through manual configuration can
forward only tagged traffic, so the matching relationship is relatively simple, as shown in
Table 1-3:
Voice
Port
traffic
type
type
Access Not supported
Supported
Make sure the default VLAN of the port exists
Trunk
and is not a voice VLAN, and the access port
Tagge
permits the traffic of the default VLAN.
d voice
traffic
Supported
Make sure the default VLAN of the port exists
Hybrid
and is not a voice VLAN, and the default VLAN
is in the list of the tagged VLANs whose traffic
is permitted by the access port.
Access
Untag Not supported, because the default VLAN of
ged the port must be a voice VLAN and the access
Trunk
voice port is in the voice VLAN. This can be done by
traffic adding the port to the voice VLAN manually.
Hybrid
Access Not supported
Supported
Make sure the default VLAN of the port exists
Trunk
and is not a voice VLAN, and the access port
permits the traffic of the default VLAN and the
Tagge
voice VLAN.
d voice
traffic
Supported
Make sure the default VLAN of the port exists
and is not a voice VLAN, and the default VLAN
Hybrid
and the voice VLAN is in the list of the tagged
VLANs whose traffic is permitted by the access
port.
Supported
Access
Make sure the default VLAN of the port is a
voice VLAN.
Supported
Untag
Make sure the default VLAN of the port is a
ged Trunk
voice VLAN and the port permits the traffic of
voice
the VLAN.
traffic
Supported
Make sure the default VLAN of the port is a
Hybrid
voice VLAN and is in the list of untagged
VLANs whose traffic is permitted by the port.
1-6
Chapter 1 Voice VLAN Configuration
Supported or not