Troubleshooting Dns - H3C S3100 8C SI Operation Manual

Operation Manual - DNS
H3C S3100 Series Ethernet Switches
Reply from 3.1.1.1: bytes=56 Sequence=4 ttl=125 time=4 ms
Reply from 3.1.1.1: bytes=56 Sequence=5 ttl=125 time=5 ms
--- host.com ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 4/4/5 ms

1.5 Troubleshooting DNS

I. Symptom
After enabling the dynamic domain name resolution, the user cannot get the correct IP
address.
II. Solution
Use the display dns dynamic-host command to check that the specified domain
name is in the cache.
If there is no defined domain name, check that dynamic domain name resolution is
enabled and the DNS client can communicate with the DNS server.
If the specified domain name exists in the cache but the IP address is incorrect,
check that the DNS client has the correct IP address of the DNS server.
Check that the mapping between the domain name and IP address is correct on
the DNS server.
1-7
Chapter 1 DNS Configuration