Displaying And Maintaining Ip Address Configuration - H3C S5500-SI Series Operation Manual

Operation Manual – IP Address and Performance
H3C S5500-SI Series Ethernet Switches
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 25/26/27 ms
# Ping a host on the subnet 172.16.2.0/24 from the switch to verify the configuration.
<Sysname> ping 172.16.2.2
PING 172.16.2.2: 56
Reply from 172.16.2.2: bytes=56 Sequence=1 ttl=255 time=25 ms
Reply from 172.16.2.2: bytes=56 Sequence=2 ttl=255 time=26 ms
Reply from 172.16.2.2: bytes=56 Sequence=3 ttl=255 time=26 ms
Reply from 172.16.2.2: bytes=56 Sequence=4 ttl=255 time=26 ms
Reply from 172.16.2.2: bytes=56 Sequence=5 ttl=255 time=26 ms
--- 172.16.2.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 25/25/26 ms
# Verify that the hosts on the subnets 172.16.1.0/24 and 172.16.2.0/24 can
communicate with each other.

1.3 Displaying and Maintaining IP Address Configuration

After the above-mentioned configuration, you can use the display command in any
view to display IP address configuration, so as to verify configuration result.
Follow these steps to display and maintain IP address configuration:
Display information about a specified or
all L3 interfaces
Display
specified or all Layer 3 interfaces
data bytes, press CTRL_C to break
To do...
brief information about
Chapter 1 IP Address Configuration
Use the command...
display ip interface [ interface-type
interface-number ]
a
display
[ interface-type interface-number ]
1-6
ip interface brief