Managing A Cluster Through The Management Device - H3C S3100 8C SI Operation Manual

Operation Manual – Stack-Cluster
H3C S3100 Series Ethernet Switches
III. Enabling NTDP globally and on a specific port
Follow these steps to enable NTDP globally and a specific port:
Enter system view
Enable NTDP globally
Enter Ethernet port view
Enable NTDP on the port
IV. Enabling the cluster function
Follow these steps to enable the cluster function:
Enter system view
Enable the cluster
function globally
V. Accessing the shared FTP/TFTP server from a member device
Follow these steps to access the shared FTP/TFTP server from a member device:
Access the shared FTP server of
the cluster
Download a file from the shared
TFTP server of the cluster
Upload a file to the shared TFTP
server of the cluster

2.2.3 Managing a Cluster through the Management Device

You can manage the member devices through the management device, for example,
adding/removing a cluster member, rebooting a member device, logging into a member
device, and so on.
Follow these steps to manage a cluster through management device:
Operation
system-view
ntdp enable
interface interface-type
interface-number
ntdp enable
Operation
system-view
cluster enable
Operation
Command
Command
Command
ftp cluster
tftp cluster get source-file
[ destination-file ]
tftp cluster put source-file
[ destination-file ]
2-17
Chapter 2 Cluster
Description
—
Required
—
Required
Description
—
Optional
By default, the cluster
function is enabled.
Description
Optional
Optional
Optional