Telnet Configuration With Authentication Mode Being None - H3C S3100 8C SI Operation Manual

Operation Manual – Login
H3C S3100 Series Ethernet Switches
3.2 Telnet Configuration with Authentication Mode Being
None
3.2.1 Configuration Procedure
Table 3-4 Telnet configuration with the authentication mode being none
Operation
Enter system view
Enter one or more VTY
user interface views
Configure
authenticate
logging into VTY user
interfaces
Configure
command
available
logging into VTY user
interface
Configure
protocols
supported by the VTY
user interface
Set the commands to
be
automatically after a
user login to the user
interface successfully
Make terminal services
available
Set the
number of lines the
screen can contain
Set
command buffer size
system-view
user-interface
first-number
[ last-number ]
not to
users authentication-mode
none
the
level
user privilege level
to users
level
the
to be protocol inbound { all
| ssh | telnet }
executed
auto-execute
command text
shell
maximum
screen-length
screen-length
the history history-command
max-size value
Chapter 3 Logging in through Telnet
Command
—
vty
—
Required
By default, VTY users are
authenticated after logging in.
Optional
By default, commands of level 0
are available to users logging
into VTY user interfaces.
Optional
By default, both Telnet protocol
and
supported.
Optional
By default, no command is
executed automatically after a
user logs into the VTY user
interface.
Optional
By default, terminal services
are
interfaces.
Optional
By default, the screen can
contain up to 24 lines.
You can use the screen-length
0 command to disable the
function to display information
in pages.
Optional
The default history command
buffer size is 10. That is, a
history command buffer can
store up to 10 commands by
default.
3-4
Description
SSH protocol
available in all user
are