Console Port Login Configuration With Authentication Mode Being Scheme - H3C S3100 8C SI Operation Manual

Operation Manual – Login
H3C S3100 Series Ethernet Switches
2.6 Console Port Login Configuration with Authentication
Mode Being Scheme
2.6.1 Configuration Procedure
Table 2-6 Console port login configuration with the authentication mode being scheme
Enter system view
Configur
e the
authentic
ation
mode
Create a local user (Enter
local user view.)
Set the authentication
password for the local
user
Specify the service type
for AUX users
Quit to system view
Enter AUX user interface
view
Operation
system-view
Enter the
domain
default ISP
domain-name
domain view
scheme { local |
none
Specify the
radius-scheme
AAA scheme
radius-scheme-name
to be applied
[
to the
hwtacacs-scheme
domain
hwtacacs-scheme-na
me [ local ] }
Quit to
quit
system view
local-user
user-name
password { simple |
cipher } password
service-type
terminal
level ]
quit
user-interface aux 0
Chapter 2 Logging in through the Console Port
Command
—
Optional
By default, the local AAA
scheme is applied.
If you specify to apply the local
AAA scheme, you need to
|
perform
concerning local user as well.
If you specify to apply an
local ] |
existing scheme by providing
the
argument, you need to perform
the following configuration as
well:
Required
No local user exists by default.
Required
[ level Required
—
—
2-13
Description
the configuration
radius-scheme-name
Perform AAA&RADIUS
configuration on the switch.
(Refer to the AAA part for
more.)
Configure the user name
and password accordingly
on the AAA server. (Refer to
the user manual of AAA
server.)