Configuring Member Devices - H3C S3100 8C SI Operation Manual

Operation Manual – Stack-Cluster
H3C S3100 Series Ethernet Switches
Enter system view
Enter cluster view
Configure a shared FTP
server for the cluster
Configure a shared TFTP
server for the cluster
Configure a shared
logging host for the cluster
Configure a shared SNMP
host for the cluster

2.2.2 Configuring Member Devices

I. Member device configuration tasks
Complete the following tasks to configure the member device:
Enabling NDP globally and on specific ports
Enabling NTDP globally and on a specific port
Enabling the cluster function
Accessing the shared FTP/TFTP server from a
member device
Operation
system-view
cluster
ftp-server ip-address
tftp-server ip-address
logging-host ip-address
snmp-host ip-address
Task
Command
2-15
Chapter 2 Cluster
Description
—
Required
Optional
By default, the
management device acts
as the shared FTP server.
Optional
By default, no shared
TFTP server is
configured.
Optional
By default, no shared
logging host is configured.
Optional
By default, no shared
SNMP host is configured.
Remarks
Required
Required
Required
Optional