H3C S3100 8C SI Operation Manual page 77

Operation Manual – Login
H3C S3100 Series Ethernet Switches
Login Configuration with Authentication Mode Being
Port Login Configuration with Authentication Mode Being
2.6 "Console Port Login Configuration with Authentication Mode Being
for more.
2) Perform the following configuration to the modem directly connected to the switch.
Refer to section
3) Connect your PC, the modems, and the switch, as shown in
the modems are properly connected to telephone lines.
Telephone line
Modem
Console port
Figure 4-1 Establish the connection by using modems
4) Launch a terminal emulation utility on the PC and set the telephone number to call
the modem directly connected to the switch, as shown in
Figure
directly connected to the switch.
Figure 4-2 Create a connection
4.2.1 "Modem
Modem serial cable
PSTN
Telephone number
of the romote end:
82882285
4-4. Note that you need to set the telephone number to that of the modem
Chapter 4 Logging in Using a Modem
Configuration" for related configuration.
Modem
4-3
None", section 2.5 "Console
Password", and section
Scheme"
Figure 4-1. Make sure
Figure 4-2 through