Configuring Global Tag Mapping Rules For Selective Qinq; Enabling The Selective Qinq Feature For A Port - H3C S3100 8C SI Operation Manual

Operation Manual – VLAN-VPN
H3C S3100 Series Ethernet Switches
Configuring Global Tag Mapping Rules
for Selective QinQ
Enabling the Selective QinQ Feature for
a Port

2.2.2 Configuring Global Tag Mapping Rules for Selective QinQ

Table 2-1 Configure global tag mapping rules for selective QinQ
Enter system view
Configure the outer VLAN
tag and enter QinQ view
Configure to add outer
VLAN tags to the packets
with the specific inner
VLAN tags
Note:
Do not enable both the selective QinQ function and the DHCP snooping function on a
switch. Otherwise, the DHCP snooping function may operate improperly.

2.2.3 Enabling the Selective QinQ Feature for a Port

Table 2-2 Enable the selective QinQ feature
Enter system view
Enter Ethernet port view
Enable the selective QinQ
feature
Task
Operation
system-view
vlan-vpn vid vlan-id
raw-vlan-id inbound
vlan-id-list
Operation
system-view
interface interface-type
interface-number
vlan-vpn selective
enable
Chapter 2 Selective QinQ Configuration
Required
Optional
Command
Command
2-3
Remarks
Description
—
Required
Required
By default, the feature of
adding an outer VLAN tag
to the packets with the
specific inner VLAN tags
is disabled.
Description
—
—
Required
By default, the selective
QinQ feature is not
enabled on a port.