Controlling Web Users By Source Ip Addresses; Disconnecting A Web User By Force - H3C S3100 8C SI Operation Manual

Operation Manual – Login
H3C S3100 Series Ethernet Switches
7.4.1 Prerequisites
The controlling policy against Web users is determined, including the source IP
addresses to be controlled and the controlling actions (permitting or denying).

7.4.2 Controlling Web Users by Source IP Addresses

Controlling Web users by source IP addresses is achieved by applying basic ACLs,
which are numbered from 2000 to 2999.
Table 7-5 Control Web users by source IP addresses
Operation
Enter system view
Create a basic ACL
or enter basic ACL
view
Define rules for the
ACL
Quit to system view
Apply the ACL to
control Web users

7.4.3 Disconnecting a Web User by Force

The administrator can disconnect a Web user by force using the related commands.
Table 7-6 Disconnect a Web user by force
Operation
Disconnect a Web
user by force
7.4.4 Configuration Example
I. Network requirements
Only the Web users sourced from the IP address of 10.110.100.52 are permitted to
access the switch.
Command
system-view
acl number acl-number
[ match-order { config |
auto } ]
rule [ rule-id ] { deny |
permit } [ rule-string ]
quit
ip http acl acl-number
Command
free web-users { all |
user-id user-id | user-name
user-name }
7-7
Chapter 7 User Control
Description
—
As for the acl number
command, the config
keyword is specified by
default.
Required
—
Optional
By default, no ACL is applied
for Web users.
Description
Required
Execute this command in user
view.