Displaying And Maintaining Ipv6 - H3C S3100 8C SI Operation Manual

Operation Manual – IPv6 Management
H3C S3100 Series Ethernet Switches
Note:
The dns resolve and dns domain commands are the same as those of IPv4 DNS. For
details about the commands, refer to DNS.

1.2.8 Displaying and Maintaining IPv6

Table 1-17 Display and maintain IPv6
Display DNS domain name suffix
information
Display IPv6 dynamic domain
name cache information.
Display DNS server information
Display the FIB entries
Display the mapping between
host name and IPv6 address
Display the brief IPv6 information
of an interface
Display neighbor information
Display the total number of
neighbor entries satisfying the
specified conditions
Display information about the
routing table
Display information related to a
specified socket
Display the statistics of IPv6
packets and IPv6 ICMP packets
Display the statistics of IPv6 TCP
packets
Display the IPv6 TCP connection
status
Display the statistics of IPv6 UDP
packets
To do...
1-18
Use the command...
display dns domain
[ dynamic ]
display dns ipv6 dynamic-host
display dns server [ dynamic ]
display ipv6 fib
display ipv6 host
display ipv6 interface
[ interface-type interface-number
| brief ]
display ipv6 neighbors
[ ipv6-address | all | dynamic |
interface interface-type
interface-number | static | vlan
vlan-id ] [ | { begin | exclude |
include } regular-expression ]
display ipv6 neighbors { all |
dynamic | static | interface
interface-type interface-number |
vlan vlan-id } count
display ipv6 route-table
[ verbose ]
display ipv6 socket [ socktype
socket-type ] [ task-id socket-id ]
display ipv6 statistics
display tcp ipv6 statistics
display tcp ipv6 status
display udp ipv6 statistics
Chapter 1 IPv6 Configuration
Remarks
Available in
any view