Ftp Configuration: A Switch Operating As An Ftp Client - H3C S3100 8C SI Operation Manual

Operation Manual – FTP-SFTP-TFTP
H3C S3100 Series Ethernet Switches

1.2.2 FTP Configuration: A Switch Operating as an FTP Client

I. Basic configurations on an FTP client
By default a switch can operate as an FTP client In this case you can connect the
switch to the FTP server to perform FTP-related operations (such as creating/removing
a directory) by executing commands on the switch.
can be performed on an FTP client.
Table 1-9 Basic configurations on an FTP client
Enter FTP client view
Specify to transfer files in
ASCII characters
Specify to transfer files in
binary streams
Set the data transfer
mode to passive
Change the working
directory on the remote
FTP server
Change the working
directory to be the parent
directory
Get the local working path
on the FTP client
Display the working
directory on the FTP
server
Create a directory on the
remote FTP server
Remove a directory on the
remote FTP server
Delete a specified file
Operation
ftp [ cluster |
remote-server
[ port-number ] ]
ascii
binary
passive
cd pathname
cdup
lcd
pwd
mkdir pathname
rmdir pathname
delete remotefile
Chapter 1 FTP and SFTP Configuration
Table 1-9
Command
1-6
lists the operations that
Description
—
Use either command
By default, files are
transferred in ASCII
characters.
Optional
passive by default.
Optional