Configuring The Attributes Of Data To Be Sent To Radius Servers - H3C S3100 8C SI Operation Manual

Operation Manual – AAA
H3C S3100 Series Ethernet Switches
Table 2-17 Set the status of RADIUS servers
Enter system view
Create a RADIUS scheme
and enter its view
Set the status of the primary
RADIUS
authentication/authorization
server
Set the status of the primary
RADIUS accounting server
Set the status of the
secondary RADIUS
authentication/authorization
server
Set the status of the
secondary RADIUS
accounting server

2.2.8 Configuring the Attributes of Data to be Sent to RADIUS Servers

Table 2-18 Configure the attributes of data to be sent to RADIUS servers
Operation
Enter system view
Create a RADIUS
scheme and enter its
view
Set the format of the
user names to be sent
to RADIUS server
Set the units of data
flows to RADIUS
servers
Operation
system-view
radius scheme
radius-scheme-name
user-name-format
{ with-domain |
without-domain }
data-flow-format data
{ byte | giga-byte |
kilo-byte | mega-byte }
packet { giga-packet |
kilo-packet | mega-
packet | one-packet }
Command
system-view
radius scheme
radius-scheme-name
state primary
authentication { block
| active }
state primary
accounting { block |
active }
state secondary
authentication { block
| active }
state secondary
accounting { block |
active }
Command
2-19
Chapter 2 AAA Configuration
Remarks
—
Required
By default, a RADIUS
scheme named "system"
has already been created
in the system.
Optional
By default, the RADIUS
servers specified with IP
addresses in the RADIUS
scheme are all in the
active state.
Remarks
—
Required
By default, a RADIUS
scheme named "system" has
already been created in the
system.
Optional
By default, the user names
sent from the switch to
RADIUS server carry ISP
domain names.
Optional
By default, in a RADIUS
scheme, the data unit and
packet unit for outgoing
RADIUS flows are byte and
one-packet respectively.