Step 22. Create Supervisors And Agents - Nortel Contact Center Multimedia Installation And Maintenance Manual
Nortel contact center multimedia software: user guide
Hide thumbs
Also See for Contact Center Multimedia:
- User manual (282 pages) ,
- Release note (88 pages) ,
- Scripting manual (812 pages)
Table of Contents
Advertisement
October 2007
Step 22. Create supervisors and agents
Supervisors review information about agents who report to them in the contact
center.
You must configure agents who handle Multimedia contacts the correct skillsets
defined in Contact Center Manager Administration.
Adding a supervisor
1
Log on to Contact Center Manager Administration.
2
Click Contact Center Management.
3
On the system tree, click the Contact Center Manager Server under which
you want to add the supervisor.
Tip: Before you can add a new supervisor, you must select a server from
the server tree.
4
On the Contact Center Management menu bar, click Add > Supervisor.
Result: The New Supervisor Details window appears.
5
Enter the following mandatory information about the supervisor:
first name
last name
phoneset logon ID
telephony/port address
6
Enter any optional information about the supervisor (for example, title or
department).
7
If the supervisor must log on to the Contact Center Manager Administration
server and use Contact Center Manager, enter a Contact Center Manager
Administration user ID and password for the supervisor.
8
Click Submit to save the new supervisor profile.
Installation and Maintenance Guide
Installing the Multimedia/Outbound server
141
Advertisement
Table of Contents
