CC MIS
9-38
Disabling an X.25 link
The Disable X.25 Link command disables an X.25 link to prevent CC
MIS from attempting to connect to the switch using that link. This al-
lows you to perform maintenance on the X.25 link.
Perform the steps below to disable an X.25 link.
Step 9-22: Disabling an X.25 link
1. Access the X.25 Diagnostics screen.
2. Highlight the link to be disabled.
3. Press the Commands function key.
The system displays the Commands menu.
4. Select the Disable option and press <Return>.
Enabling an X.25 link
The X.25 Link command enables an X.25 link so that CC MIS can
connect to the switch using that link. This allows you to bring a link
into service after it has been disabled.
Perform the steps below to enable an X.25 link.
Step 9-23: Enabling an X.25 link
1. Access the X.25 Diagnostics screen.
2. Highlight the link to be enabled.
3. Press the Commands function key.
The system displays the Commands menu.
4. Select the Enable option and press <Return>.
Release 5.2
297-2671-545