Set Dap Auto Mode; Set Dap Auto Radiotype - D-Link DWS-1008 Cli Reference Manual

DWS-1008 CLI Reference Guide
mode
tx-pwr
radio-profile (profile)
max-power
min-client-rate
max-retransmissions
Examples:
DWS-1008# set dap auto
success: change accepted.

set dap auto mode

Enables a switch's template for automatic Distributed AP configuration.
Syntax:
enable
disable
Defaults:
Access:
Usage:
Examples:
DWS-1008# set dap auto mode enable
success: change accepted.

set dap auto radiotype

Sets the radio type for single-DWL-8220AP radios that use the DWL-8220AP configuration
template.
D-Link Systems, Inc.
enabled
Highest setting allowed for the country of operation
default
default
5.5 for 802.11b/g
24 for 802.11a
10
The following command creates a template for automatic Distributed AP
configuration:
set dap auto mode {enable | disable}
Enables the DWL-8220AP configuration template.
Disables the DWL-8220AP configuration template.
The DWL-8220AP configuration template is disabled by default.
Enabled
You must use the set dap auto command to create the template before you
can enable it.
The following command enables the template for automatic Distributed AP
configuration:
Access Point Commands
167