D-Link DWS-1008 Cli Reference Manual page 152

DWS-1008 CLI Reference Guide
set mac-usergroup attr (continued)
Syntax: set mac-usergroup group-name attr attribute-name value
group-name
attribute-namevalue Name and value of an attribute you are using to authorize all MAC
Defaults: None
Access: Enabled
Usage: To change the value of an attribute, enter set mac-usergroup attr with the new
value. To delete an attribute, use clear mac-usergroup attr.
Examples: The following command creates the MAC user group eastcoasters and assigns
DWS-1008# set mac-usergroup eastcoasters attr vlan-name orange
success: change accepted.
set mobility-profile
Creates a Mobility Profile and specifies the DWL-8220AP access point and/or wired
authentication ports on the switch through which any user assigned to the profile is allowed
access.
Syntax: set mobility-profile name name {port {none | all | port-list}} |
{dap {none | all | dap-num}}
name
none
all
port-list
dap-num
D-Link Systems, Inc.
Name of a MAC user group. Specify a name of up to 32 alphanumeric
characters, with no spaces.
users in the group for a particular service or session characteristic.
the group members to VLAN orange:
Name of the Mobility Profile. Specify up to 32 alphanumeric characters, with
no spaces.
Prevents any user to whom this profile is assigned from accessing any
DWL-8220AP access point or wired authentication port on the switch.
Allows any user to whom this profile is assigned to access all DWL-8220AP
access ports and wired authentication port on the switch.
List of DWL-8220AP access ports or wired authentication ports through
which any user assigned this profile is allowed access. The same port can be
used in multiple Mobility Profile port lists.
List of Distributed AP connections through which any user assigned this
profile is allowed access. The same Distributed AP can be used in multiple
Mobility Profile port lists.
AAA Commands
151