Set Ip Ssh Server - D-Link DWS-1008 Cli Reference Manual

DWS-1008 CLI Reference Guide

set ip ssh server

Disables or reenables the SSH server on a DWS-1008 switch.
Caution: If you disable the SSH server, SSH access to the switch is also disabled.
Syntax: set ip ssh server {enable | disable}
enable
disable
Defaults: The SSH server is enabled by default.
Access: Enabled
Usage: You must generate an SSH authentication key to use SSH.
The maximum number of SSH sessions supported on a DWS-1008 switch is eight. If Telnet
is also enabled, the switch can have up to eight Telnet or SSH sessions, in any combination,
and one Console session.
D-Link Systems, Inc.
Enables the SSH server.
Disables the SSH server.
IP Services Commands
72