Show Sessions Network - D-Link DWS-1008 Cli Reference Manual

DWS-1008 CLI Reference Guide
Field
Session
Server
Address
Server Port
Client Port

show sessions network

Displays summary or verbose information about all network sessions, or network sessions
for a specified username or set of usernames, MAC address or set of MAC addresses,
VLAN or set of VLANs, or session ID.
Syntax: show sessions network [user user-glob | mac-addr mac-addr-glob | ssid ssid-
name | vlan vlan-glob | session-id session-id | wired] [verbose]
user user-glob
mac-addr mac-
addr-glob
ssid ssid-name
D-Link Systems, Inc.
show sessions telnet client Output
Description
Session number assigned by MSS when the client
session is established.
IP address of the remote device.
TCP port number of the remote device's TCP
server.
TCP port number MSS is using for the client side
of the session.
Displays all network sessions for a single user
or set of users.
Specify a username, use the double-
asterisk wildcard character (**) to specify all
usernames, or use the single-asterisk wildcard
character (*) to specify a set of usernames up
to or following the first delimiter character—
either an at sign (@) or a period (.). (For
details, see "User Globs" on page 9.)
Displays all network sessions for a MAC
address. Specify a MAC address in
hexadecimal numbers separated by colons (:).
Or use the wildcard character (*) to specify a
set of MAC addresses. (For details, see "MAC
Address Globs" on page 10.)
Displays all network sessions for an SSID.
Session Management Commands
329