DWS-1008 CLI Reference Guide
set ip alias
Configures an alias, which maps a name to an IP address. You can use aliases as shortcuts
in CLI commands.
Syntax: set ip alias name ip-addr
name
ip-addr
Defaults: None
Access: Enabled
Examples: The following command configures the alias HR1 for IP address 192.168.1.2:
DWS-1008# set ip alias HR1 192.168.1.2
success: change accepted.
set ip dns
Enables or disables DNS on a DWS-1008 switch.
Syntax: set ip dns {enable | disable}
enable
disable
Defaults: DNS is disabled by default.
Access: Enabled.
Examples: The following command enables DNS on a DWS-1008 switch:
DWS-1008# set ip dns enable
Start DNS Client
set ip dns domain
Configures a default domain name for DNS queries. The switch appends the default domain
name to domain names or hostnames you enter in commands.
D-Link Systems, Inc.
String of up to 32 alphanumeric characters, with no spaces.
IP address in dotted decimal notation.
Enables DNS.
Disables DNS.
IP Services Commands
66