Security Acl Commands - D-Link DWS-1008 Cli Reference Manual

DWS-1008 CLI Reference Guide
Use security ACL commands to configure and monitor security access control lists (ACLs).
Security ACLs filter packets to restrict or permit network usage by certain users or traffic
types, and can assign to packets a class of service (CoS) to define the priority of treatment
for packet filtering.
(Security ACLs are different from the location policy on a DWS-1008 switch, which helps you
locally control user access.
clear security acl
Clears a specified security ACL, an access control entry (ACE), or all security ACLs, from
the edit buffer. When used with the command commit security acl, clears the ACE from the
running configuration.
Syntax: clear security acl {acl-name | all} [editbuffer-index]
acl-name
all
editbuffer-index
Defaults: None
Access: Enabled
Usage: This command deletes security ACLs only in the edit buffer.You must use the commit
security acl command with this command to delete the ACL or ACE from the running
configuration and nonvolatile storage.
The clear security acl command deletes a security ACL, but does not stop its current filtering
function if the ACL is mapped to any virtual LANs (VLANs), ports, or virtual ports, or if the
ACL is applied in a Filter-Id attribute to an authenticated user or group of users with current
sessions.
Examples: The following commands display the current security ACL configuration, clear
D-Link Systems, Inc.

Security ACL Commands

Name of an existing security ACL to clear. ACL names start with a
letter and are case-insensitive.
Clears all security ACLs.
Number that indicates which access control entry (ACE) in the security
ACL to clear. If you do not specify an ACE, all ACEs are cleared from
the ACL.
acl_133 in the edit buffer, commit the deletion to the running configuration, and
redisplay the ACL configuration to show that it no longer contains acl_133:
Security ACL Commands
270