D-Link DWS-1008 Cli Reference Manual page 173

DWS-1008 CLI Reference Guide
Examples:
DWS-1008# set ap 1 name techpubs
success: change accepted.
set {ap | dap} radio antennatype
Sets the model number for an external antenna.
Syntax:
ap port-list
dap dap-num
radio 1
radio 2
antennatype
{ANT1060 | ANT1120 |
ANT1180 | internal}
antennatype
{ANT5060 | ANT5120 |
ANT5180 | internal}
Defaults:
Examples:
DWS-1008# set dap 1 radio 1 antennatype ANT1060
success: change accepted.
set {ap | dap} radio auto-tune max-power
Sets the maximum power that RF Auto-Tuning can set on a radio.
Syntax:
D-Link Systems, Inc.
The following command changes the name of the DWL-8220AP access point
on port 1 to techpubs:
set {ap port-list | dap dap-num} radio {1 antennatype ANT1060 | ANT1120 |
ANT1180 | internal} | {2 antennatype ANT5060 | ANT5120 | ANT5180 |
internal}
List of ports connected to the DWL-8220AP access points on
which to set the channel.
Number of a Distributed AP on which to set the channel.
Radio 1 of the DWL-8220AP.
Radio 2 of the DWL-8220AP.
802.11b/g external antenna models:
• ANT1060 - 60° 802.11b/g antenna
• ANT1120 - 120° 802.11b/g antenna
• ANT1180 - 180° 802.11b/g antenna
• internal - Uses the internal antenna instead
802.11a external antenna models:
• ANT5060 - 60° 802.11a antenna
• ANT5120 - 120° 802.11a antenna
• ANT5180 - 180° 802.11a antenna
• internal - Uses the internal antenna instead
All radios use the internal antenna by default.
The following command configures the 802.11b/g radio on Distributed AP 1
to use antenna model ANT1060:
set {ap port-list | dap {dap-num | auto}} radio {1 | 2}
auto-tunemax-power power-level
Access Point Commands
172